multilayer coating meaning in English
多层镀层
Examples
- Study on radar wave absorbing property of multilayer coatings
涂层与镀层复合雷达波吸收性能研究 - Improvement and progress in mechanical , tribological properties , high - temperature oxidation and corrosion resistance of hard multilayer coatings were summarized . efficient methods were put forward
摘要总结了硬质多层膜改善力学性能、摩擦性能、高温氧化性能、腐蚀性能的方法及进展，指出了有效途径。 - The magnetron sputtering method is adopted to grow single film samples , we take the precision measurement of stress by zygo interferometer . it is observed that growth of the mo component in multilayers is tensile , while si is compressive . study of stress in mo / si multilayers are carried out for application of extreme ultraviolet multilayer coatings in the diagnosed high dense plasmas and euvl
研究了mo 、 si单层膜的应力状态；采用磁控溅射法在超光滑si基底上制备了mo 、 si单层膜，利用zygo干涉仪对其进行应力检测，检测结果表明：在13nmmo si多层膜中， mo单层膜表现为张应力， si单层膜表现为压应力。 - The main results are : grinding is favorable to improve surface smooth degree , while nitrided and slow deposition makes sic granules fine ; the width of coatings gap increased in order of grinding , nitrided and vacuum heat treatment , but gap defects in multilayer coatings could be removed by slow deposition ; temperature of maximum weight loss could be decrease to 600 by grinding , vacuum heat treatment or slow deposition , but it will increased to 800 after nitrided ; oxidation kinetics curves all varied with the coating modifications
主要有：磨削改性有利于提高涂层表面平整度，氮化和慢沉积使涂层表面颗粒细化。涂层间隙宽度按磨削改性、高温氮化、真空热处理依次增大，而慢沉积可获得无面缺陷的多层涂层。磨削改性、真空热处理及慢沉积均使最大氧化失重温度点提前至600 ，而高温氮化则使最大失重点后移至800 。